Package Included:
1 x DC Motor Speed Controller

]]> https://ktechnics.com/product/h-bridge-dc-motor-driver-mx1616-mini-l298n-module/ Wed, 28 Sep 2022 13:16:40 +0000 https://www.ktechnics.com/?post_type=product&p=30636 DC Dual H-Bridge Motor Controller Driver Board DC Dual H-Bridge Motor Controller Driver BoardThis MX1616 based DC motor controller board allows users to attach an external power source to power DC motors that require a little bit more current. Plug in an external power source up to 10VDC with a max current of 2.5A. The IC onboard contains two h-bridges allowing the control of two independent DC motors or one 2-phase 4 wire motor. Thanks to built in MOS switches and a design that ensures thermal protection, you can easily interface it with most microcontroller boards like the Arduino using 5V power lines and PWM I/Os. Thanks to its high current capabilities, you can use this module for a lot of demanding applications. There is even a 2mm mounting hole if needed. The installation of this module is also simple. There are two supply lines (labeled as “+” an “-”) to power the entire module, 4 signal inputs and 4 motor outputs (IN1 and IN2 control MOTOR A; IN3 and IN4 control MOTOR B). Be wary, at maximum values this board may overheat and we don’t recommend pushing this module to its limits for extended periods of time. Specifications:

• Operating voltage: 2V-10V
• Signal input voltage: 1.8-7V
• Single working current: 1.5A
• Max current: 2.5A
• Standby current: less than 0.1uA
• Dimensions : 24.7 * 21 * 5mm (L x W x H)
• Mounting hole diameter: 3 mm
• Temperature: -40℃ to +80℃

DC Dual H-Bridge Motor Controller Driver Board DC Dual H-Bridge Motor Controller Driver BoardThis MX1616 based DC motor controller board allows users to attach an external power source to power DC motors that require a little bit more current. Plug in an external power source up to 10VDC with a max current of 2.5A. The IC onboard contains two h-bridges allowing the control of two independent DC motors or one 2-phase 4 wire motor. Thanks to built in MOS switches and a design that ensures thermal protection, you can easily interface it with most microcontroller boards like the Arduino using 5V power lines and PWM I/Os. Thanks to its high current capabilities, you can use this module for a lot of demanding applications. There is even a 2mm mounting hole if needed. The installation of this module is also simple. There are two supply lines (labeled as “+” an “-”) to power the entire module, 4 signal inputs and 4 motor outputs (IN1 and IN2 control MOTOR A; IN3 and IN4 control MOTOR B). Be wary, at maximum values this board may overheat and we don’t recommend pushing this module to its limits for extended periods of time. Specifications:

• Operating voltage: 2V-10V
• Signal input voltage: 1.8-7V
• Single working current: 1.5A
• Max current: 2.5A
• Standby current: less than 0.1uA
• Dimensions : 24.7 * 21 * 5mm (L x W x H)
• Mounting hole diameter: 3 mm
• Temperature: -40℃ to +80℃

]]>

Description

1803BK DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).

The input power range is DC 1.8-15V .
Use a 2A resettable fuse to protect the controller.

Potentiometer with switch function.
Operating instruction: Before you attempting to wire the controller, make sure power is off.

WARNING: TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.
Connect wires refer to the “wiring diagram” (NO.5 picture).

Turn on the power, and adjust the potentiometer.
The LED indicates the power up and the speed of motor.

Input supply voltage: 1.8V-15VDC;
The maximum output power: 30W

The maximum continuous output current: 2A

Duty Cycle adjustable: 0%-100%

Material: Plastic

Colour: Green
Item size: 1.3 x 1.3 x 0.6 inches; Net Weight: 0.5 ounces

Specification:

Condition: New
ULN2003A motor driver chip
Chip all the pins already leads for easy connection to use
5-12V power supply
4-way signal indicator
XH-5P socket, can be connected directly 28BYJ-48 Model stepper motor
PCB board size: 40.5 x 21.3 mm

Packing Include:

1pcs x   ULN2003A motor driver

Due to the recent surge in interest in multirotor aircraft we have recently added the EMax BLHeli ESC range to our catalogue. These ESCs have been designed and optimised for multirotor applications. They represent a massive step forward in off-the-shelf ESC design.

The BLHeli range uses a SiLabs processor running BLHeli firmware upgraded to incorporate several improvements and additional features such as higher update rates which give much quicker linear throttle response when compared to regular non-multirotor ESCs.

EMax is now a member of the BLHeli team of developers and contributors and the first ESC manufacturer to publish source programming in China.
Click here for the link to EMax BLHeli open source code: https://github.com/bitdump/BLHeli/tr…0versions/EMAX

Features
* Authentic electronic components to ensure high quality and enhance the electrical current endurance ability of the ESC
* Based on BLHeli firmware, optimised for high performance with great linearity and much quicker throttle response
* Specially designed for multirotors but also compatible with fixed-wing aircraft and helicopters
* Rotation direction of the motor is programmable: normal, reverse or bi-directional
* Multiple programmable protection features including: low-voltage cut-off protection / over-heat protection / throttle signal loss protection
* Integrated lost model alarm – after a short delay the ESC will beep when the throttle is moved to the fully closed position
* Throttle range can be configured and is fully compatible with all receivers, providing smooth, linear and precise throttle response
* All parameters can be programmed using a program card or directly from your transmitter

BLHeli ESC Range Specification:

BLHeli ESC User Instructions – click here

Description:L298N Motor Driver

Features:

This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.

Download Datasheet

Standard BLDC 30 amp ESC Electronic Speed Controller with Connector is specifically made for quadcopters and multi-rotors. It provides faster and better motor speed control giving better flight performance compared to other available ESCs.

STANDARD 30 amp ESC Electronic Speed Controller can drive motors that consume up to 30A current. It works on 2-3S LiPo batteries. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. This is useful to control our brushless motors with a 2-3S LiPo battery (make sure the motor doesn’t draw more than 30A).

This particular ESC is recommended with an A2212 brushless motor (1000kv, 1400kv, 2200kv).

ESC CONNECTORS:

• Battery Side – Male Deans ( T ) Connector.
• Motor Side – Female 3.5mm Gold Connector.

Features:

1. This 30 amp ESC for BLDC has onboard BEC
2. This ESC comes with a male dean T-connector
3. Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo
4. APPLICATION: Multirotors, Rc Airplanes, etc

Package Includes:

1 x Standard 30A BLDC ESC Electronic Speed Controller with Connectors

Description

• Motor Type:DC Motor
• Model Number:20A22S
• Input voltage:DC 9-60V
• Continuous current:within 18A
• Maximum power:1200W
• Quiescent current:0.01ma
• Speed control type:Current modulation
• Speed adjustment mode:Linear potentiometer 270 degrees
• Working frequency:25KHZ
• Connection type:common
• Size:92mm*52mm*36mm

Description