ATMEGA16-16PU

8-bit Microcontrollers – MCU 16kB Flash 0.5kB EEPROM 32 I/O Pins

KES 400.00

Out of stock

SKU: 902 Categories: ,

Description


High-performance, Low-power Atmel
®
AVR
®
8-bit Microcontroller

Advanced RISC Architecture
– 131 Powerful Instructions – Most
Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier

High Endurance Non-volatile Memory segments
– 16 Kbytes of In-System Self-pro
grammable Flash program memory
– 512 Bytes EEPROM
– 1 Kbyte Internal SRAM
– Write/Erase Cycles:
10,000 Flash/1
00,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C
(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-W
rite Operation
– Programming Lock for Software Security

JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities A
ccording to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, an
d Lock Bits through the JTAG Interface

Peripheral Features
– Two 8-bit Timer/Counters with Se
parate Prescalers and Compare Modes
– One 16-bit Timer/Counter
with Separate Prescaler, Compare Mode, and Capture
Mode
– Real Time Counter with Separate Oscillator
– Four PWM Channels
– 8-channel, 10-bit ADC
8 Single-ended Channels
7 Differential Channels in TQFP Package Only
2 Differential Channels with Prog
rammable Gain at 1x, 10x, or 200x
– Byte-oriented Two-wi
re Serial Interface
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator

Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
and Extended Standby

I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF

Operating Voltages
– 2.7V – 5.5V for ATmega16L
– 4.5V – 5.5V for ATmega16

Speed Grades
– 0 – 8 MHz for ATmega16L
– 0 – 16 MHz for ATmega16

Power Consumption @ 1 MHz, 3V, and 25
°
C for ATmega16L
– Active: 1.1 mA
– Idle Mode: 0.35 mA
– Power-down Mode: < 1 μA

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.