Arduino Mega 2560 Development Board + Cable Usb

Arduino Mega 2560

Description

Arduino Mega 2560

• The Arduino Mega is a microcontroller board based on the ATmega2560.
• It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
• It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
• The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
• The Mega 2560 R3 also adds SDA and SCL pins next to the AREF.
• In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes.
• The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

  Features:

  Microcontroller	ATmega2560
  Operating Voltage	5V
  Input Voltage (recommended)	7-12V
  Input Voltage (limit)	6-20V
  Digital I/O Pins	54 (of which 15 provide PWM output)
  Analog Input Pins	16
  DC Current per I/O Pin	20 mA
  DC Current for 3.3V Pin	50 mA
  Flash Memory	256 KB of which 8 KB used by bootloader
  SRAM	8 KB
  EEPROM	4 KB
  Clock Speed	16 MHz
  LED_BUILTIN	13
  Length	101.52 mm
  Width	53.3 mm
  Weight	37 g

Getting Started

You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics.

• The best price of Arduino Mega 2560 Development Board by ktechnics  in Kenya