RELAYS, MOTORS,MOTOR DRIVERS & VALVES
-
KES 1,000.0012v 200rpm gear motor Zhengk High Torque Electric Motor Low Noise
Motor Diameter 25mm, Gearbox Length19mm, Voltage 12V, No Load Speed200RPM, Rated Speed140RPM, Rated Torque(Kg-cm)0.51, Rated Current(AMP)0.22
-
KES 1,000.00
12v 300rpm gear motor Zhengk High Torque Electric Motor Low Noise
Motor Diameter 25mm, Gearbox Length19mm, Voltage 12V, No Load Speed200RPM, Rated Speed140RPM, Rated Torque(Kg-cm)0.51, Rated Current(AMP)0.22
-
KES 1,300.00
12V DC Gear motor 37mm 200 rpm ZHENGKE ZGA37RG/ZGB37RG Eccentric
- Voltage / Current: 12 V DC, RPM: 200, : Reversible, Overall Length: Approx. 7.6 cm / 3 “, diameter: Approx 3.5 cm / 1.38”, Shaft length: Approx. 2 cm / 0.8 “, Shaft diameter: Approx. 0.6 cm / 0.24 “
-
KES 1,300.00
12V DC Gear motor 37mm 300 rpm ZHENGKE ZGA37RG Eccentric
ZGB37RG(Eccentric Shaft Output), Gear-Box Diameter:37mm, OutPut Shaft Diameter:6mm,No-Load Speed:300RPM, Volage:DC12V, Reduction Ratio:1/17.4, Loading Torque:0.9kgf.cm, Direction of Rotation:CCW
-
KES 500.00
12V-36V Pulse Width PWM DC Motor Speed Regulator Controller Switch 12V 24V 3A AL
100% brand new and high quality.
•Control the speed of a DC motor with this controller.
•Control the light of a lamp with this controller.
•High efficiency, high torque, high power, high heat dissipation.
•With over-current protection.
•The high quality COMBICON improve the stability of circuit. -
KES 1,000.00
25mm 12V DC Gear Motor 100rpm High Torque Electric Motor Low Noise
- Brand Name:ZHENGK,Model Number:ZGA25RP, Type:Gear Motor, Torque:0.7kg.cm, As you required, Speed(RPM):100rpm, Continuous Current(A):0.4A, Output Power:0.7W, Voltage(V):,12V,Efficiency:IE 3
-
KES 600.00
3000 Thyristor Power Electronic Voltage Regulator
- operating voltage: AC 0 V-220 V, Maximum power: 3800 W, Voltage regulation: AC 0-220 V, high temperature FR-4 PCB, size: 60mm x 45mm x 40mm
-
KES 350.00
5V 2 Two Channel Relay Module DC 5V + Optocoupler For Arduino PIC ARM AVR DSP
5V Two 2 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino at 375.00php
-
KES 400.00
5V 4 Four Channel Relay Module DC 5V + Optocoupler For Arduino PIC ARM AVR DSP
Specifications
- 1-Channel Relay interface board,
- 5v 4-channel relay interface board.
- Each needs 15-20mA Driver Current
-
KES 1,000.00
A2212 1000KV Brushless Motor
A2212 1400KV – RPM/V :1400, Idle Current(A) : 0.68/8, Max Current (A) : 20, – Max Power(W) : 220/3, Biggest Thrust g/S : 1265/4
-
KES 400.00
A4988 Stepper Motor Driver Module 3D Printer Polulu StepStick RAMPS RepRap
- Low RDS(ON) outputs,Automatic current decay mode detection/selection, Mixed and Slow current decay modes, Synchronous rectification for low power dissipation, Internal UVLO,3.3 and 5 V compatible logic supply,Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16
Showing 1–20 of 69 results