ST-LINK/V2 Debugger EMULATOR

Introduction :

 

· ST-LINK / V2 is an online simulation, and download STM8 and STM32 development tool!

 

Basic Properties

 · ST-LINK / V2 is ST STMicroelectronics evaluation, development STM8 and STM32 family MCU series designed to set online download for the integration of simulation and development tools.

 · STM8 family via SWIM interface with the ST-LINK / V2 connection;

 · STM32 family through the JTAG / SWD interface with the ST-LINK / V2 connections.

 · ST-LINK / V2 and PC via high speed USB2.0 connection.

 

Supported Software

 

· Direct support ST official IDE (Integrated Development Environment software) ST Visual Develop (STVD) and burning software ST Visual Program (STVP).

· Support ATOLLIC, IAR and Keil, TASKING integrated development environment such as the STM32.

 

Supported Devices

 · Supports all interfaces with SWIM STM8 MCU

 · Supports all with JTAG / SWD interface STM32 MCU

 ·Supports the following models: (The following information corresponds to ST Visual Programmer 3.2.3 version Patch 1)

ST-LINK/V2 Status

 

The LED labeled \’COM\’ on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:

• LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.
• LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).
• LED is blinking GREEN/RED: data are being exchanged between the target and the PC.
• LED is GREEN: the last communication has been successful.
• LED is ORANGE: ST-LINK/V2 communication with the target has failed.

 

 

Package Contains

 

1. ST-LINK/V2 × 1
2. USB type A to Mini-B cable × 1
3. 20-pin JTAG/SWD flat ribbon × 1
4. 4-pin SWIM cable × 1
5. 4-pin SWIM custom connector cable × 1